[SOLVED]forrtl: severe (59): list-directed I/O syntax error, unit -5

TianYANG1123

Bonjour,

J'ai installé une version de code_aster en parrallèle avec mpi. Je essaye le solveur "MUMPS" dans un environnement mpi.

J'ai eu une erreur:

forrtl: severe (59): list-directed I/O syntax error, unit -5, file Internal List-Directed Read Image PC Routine Line Source asteru 0000000002B83EFD Unknown Unknown Unknown asteru 0000000002B82A05 Unknown Unknown Unknown asteru 0000000002B38BD0 Unknown Unknown Unknown asteru 0000000002AEA4CA Unknown Unknown Unknown asteru 0000000002AE9CC0 Unknown Unknown Unknown asteru 0000000002B0BA76 Unknown Unknown Unknown asteru 0000000002B0933B Unknown Unknown Unknown asteru 0000000000B39E8A amumpi_ 228 amumpi.F asteru 0000000000653568 amumpd_ 186 amumpd.F asteru 00000000006522BD amumph_ 362 amumph.F asteru 0000000001195B69 tldlg3_ 213 tldlg3.f asteru 0000000000B97A63 preres_ 223 preres.f asteru 000000000185499D meacmv_ 253 meacmv.f asteru 000000000165D53C mereso_ 179 mereso.f asteru 0000000001288BC5 mestat_ 212 mestat.f asteru 0000000000C8EC46 op0046_ 142 op0046.f asteru 0000000000AC1794 ex0000_ 186 ex0000.f asteru 00000000005BC5FA execop_ 86 execop.f asteru 0000000000578AA4 expass_ 82 expass.f asteru 00000000005604CD aster_oper 2577 astermodule.c asteru 00000000019A5AED Unknown Unknown Unknown asteru 00000000019A55C0 Unknown Unknown Unknown asteru 00000000019A55C0 Unknown Unknown Unknown asteru 00000000019A55C0 Unknown Unknown Unknown asteru 00000000019A55C0 Unknown Unknown Unknown asteru 00000000019A55C0 Unknown Unknown Unknown asteru 00000000019A011B Unknown Unknown Unknown asteru 00000000019A4D57 Unknown Unknown Unknown asteru 00000000019A55C0 Unknown Unknown Unknown asteru 00000000019A011B Unknown Unknown Unknown asteru 00000000019A0242 Unknown Unknown Unknown asteru 00000000019C82EF Unknown Unknown Unknown asteru 00000000019C9227 Unknown Unknown Unknown asteru 00000000019DDD81 Unknown Unknown Unknown asteru 000000000055BEA8 main 87 python.c libc.so.6 00002AB8726F6BC6 Unknown Unknown Unknown

asteru 000000000055BC41 Unknown Unknown Unknown

J'ai vu dans un topic que cette erreur est à cause de la version de MUMPS:

http://www.code-aster.org/forum2/viewtopic.php?id=13718

Mais même si je utilise la version 4.9.2 de MUMPS, l'erreur est toujours là.. Sinon, je ne trouve rien du tout dans notre forums.

Quelqu'un pourrait me donner une idée? Je vais attacher le fichier de .comm et le output.

Merci

Tian YANG

Attached file:
Calcul_mumps.comm, 1983kb

TianYANG1123

Et ici, le fichier d'output.

Attached file:
output_10.8_PAR1.qsub, 94864kb

mathieu.courtois

Hello,

The Mumps version to use with Code_Aster version 10 is the 4.9.2, but Code_Aster v10 is not yet supported.

Please update to 11.4 (=12.0).

TianYANG1123

Hello,

Thanks for your response. I would like to know that which versions of ParMETIs and PETSc we have to use for compile 11.4 code_aster.

Tian

mathieu.courtois

For pmetis, just use this included within aster-full-src (metis 4.0.3).

For petsc, we use the version 3.2. Should work with 3.3 but api changed in the last 3.4 release.

TianYANG1123

Hi,

In fact, my question was for the version of ParMETIs which is for parallele version of code_aster. For compile mumps 4.10, it ask un variable "metis_nodeWND" which is not in ParMETIs 4.0.3. And serial parts of code of "ParMETIs 4" are now based on Metis 5.0. So we can only use ParMETIS 3.2.0 to compile the parallele version of code_aster 11.4.

Tian

ThomasDESOZA

Forget about ParMetis and PTScotch, neither Code_Aster nor MUMPS use them as of now.

Just use the sequential versions.

TdS

TianYANG1123

Thomas,

You mean that codea-ster version 11.4 to use that in MPI version,

You do not need to compile mumps using mpi?

Do not need parmetis but only need metis? Not ptscotch but scotch?

But it is not what this website says concerning version 11.2

http://www.code-aster.org/wiki/doku.php?id=en

or version 11.3

https://sites.google.com/site/codeastersalomemeca/home/code_asterno-heiretuka/parallel-code_aster-11-3-acml

ThomasDESOZA

Aster does not need ParMetis nor PT-Scotch.

Aster parallel needs a parallel MUMPS (compiled with MPI support that is).

MUMPS parallel does not need ParMetis nor PT-Scotch (when used with Aster).

If you compile with ParMetis or PT-Scotch it will be OK but it is not needed so since you're having trouble with just forget about it.

TdS

TianYANG1123

Thanks Thomas, I got it. And I also want to know that where we can compile aster 11.4 en parallele. Because the config.txt of aster 11.4 is different with 10.8's. I can't find where we can change the configurations..

ThomasDESOZA

TianYANG1123 wrote:
Thanks Thomas, I got it. And I also want to know that where we can compile aster 11.4 en parallele. Because the config.txt of aster 11.4 is different with 10.8's. I can't find where we can change the configurations..

http://www.code-aster.org/forum2/viewtopic.php?id=18947

TianYANG1123

Thanks! But I don't know how to use Waf. I have to learn it :)

The last question: which version of petsc i have to use to compile parallele code_aster?

mathieu.courtois

courtois wrote:
For petsc, we use the version 3.2. Should work with 3.3 but api changed in the last 3.4 release.

TianYANG1123

I saw that. But there was a error when I do :

/tmp/install_aster.8447/aster-11.4.0/waf configure --use-config=auto_config --install-tests --prefix=/home/datapcim/meca/installation/codeaster_11.4.0_PAR1/11.4

Checking for header petsc.h : no

In fact, it ask something in petsc-3.2-p7/include and in petsc-3.2-p7/arch-linux2-c-opt/include/ at the same time