Salome Meca 2024.1 on WSL2 ready to use distribution

OL7

Hello HB,

Thank you very much for your quick return on the screen issue.

Olivier

rmoortgat

hberro
Doesn't work here WIN11 WSL2

Roger

hberro

rmoortgat

Do you mean that you still have clicking discrepancy event after toggling full screen ?

rmoortgat

hberro No, It's OK.

Overwan

Hello,
Thank you for the new version of Salome.

I have a question: my Object Browser window is visible on my screen, but I can't use it. Do you have a solution to make it functional again?

I have tried to move the window, but it’s not possible, and I can't interact with the Object Browser.

Thanks in advance for your help!

Overwan

I have the same disease in mesh.

Ava22

Overwan
Hi,
Did you find the solution?
I have the same issue

lIlIl

hberro THANK YOU. I love the new run_aster tool, this is what I always wanted. In fact, my homemade tools are now obsolete.
When will this be on the official Code_Aster "Download" page (not updated since 2020)?
Keep up the good work!

lIlIl

⚠ Be aware that installing this distribution will flood your Windows menu with a lot of apps:

lIlIl

Although salome_meca is working, when I call as_run it says <F>_FILE_NOT_FOUND file not found : config.txt.
If I create a config.txt file but leave it empty:

<INFO> prepare environment in /local00/tmp/smeca-user-DESKTOP-SJHEN4Q-interactif_1627
<E>_FILE_NOT_FOUND path does not exist : asteru.exe
<E>_FILE_NOT_FOUND path does not exist : commande
<E>_FILE_NOT_FOUND path does not exist : elements

Why is it missing? Where can I find it?

Edit: I copied the one from /opt/salome_meca/V2024.1.0_scibian_univ/tools/Code_aster_stable-1670/share/aster/config.txt into my folder and it worked.

cskn

Hi.
I am new to SM and still learning how to run. I had installed the software as suggested above and it was working fine. Occasionally I get saving error. Then I shut down and restart and then the issue disappears, most of the times.
All was fine till yesterday when suddenly I saw this error in the command window while saving the file:
"
Component implementation not found: PARAVIS
Component PARAVIS: Can't find C++ implementation libPARAVISEngine.so
Component PARAVIS: Can't find python implementation PARAVIS(.py)
Component PARAVIS: Can't find executable implementation PARAVIS.exe
"
Multiple reinstallations and restarts couldn't make the program run again.
What could be the issue here? Intentionally, I have not deleted any programs or software's from my computer.

Reinstalled again just now, but no success!
Any suggestions?

cskn

Any suggestions, anyone?
After months of studying documentation, following various tutorials multiple times and many trial runs that ended in errors or nonconvergence, I have just been able to do a nonlinear hyper elastic material simulation with contact. It's not perfect or accurate; but some success. Now I am helpless! Even after multiple reinstallations, I get the same message and the program shuts down!

hberro

cskn

Hello,

Could you provide a more complete log from the moment you start the wsl2 distrib till the launching of Salome Meca ? If you can record a short video showing the terminal output, we can help you better.

PARAVIS errors may be misleading and masking the actual problem especially if you are not visualizing a result when the program crashes...

cskn

hberro Thank you for your response. Since I had already removed the smeca-2024 installation, I installed it again (as explained in this forum) and ran a simulation. I did record the terminal, but unable to attach because of the upload size limit. Hence attaching the recording as two screenshots.
The screen recording is of the terminal output from the moment the file opened, to the failure, and exit of the program. I hope this is what you meant.

hberro

So Salome starts correctly? And then crashes when you load asterstudy ?

What if you just use GEOM SMSH PARAVIS, does it work fine ?

Do you have enough space and write permission on the disk where the wsl distrib is imported ?

cskn

Hello.
Salome starts correctly and it crashes when I launch AsterStudy. I have enough space and write permissions.
I did a step-by-step analysis of the simulation set up to understand when the problem occurs.
I was able to do all the steps and save them without any problem. Even the Paravis was functioning normally.
What I observed was, whenever AsterStudy module is launched, in some studies, the option to select "stable" version doesn't show up and then the problem as I explained above happens.
After this I did couple of studies taking care to select "Stable" AsterStudy version and those studies did not crash. However, sometimes still, the option to select 'stable' version does not show up. I then close the program and restart it.
If this was really the problem, I am satisfied with this solution. I will monitor this for some days and report.
Thanks a lot for your support, sir.

cskn

After couple of successful runs, the same error started.
As I said in my last post, the message window to select 'Stable' version of AsterStudy is not shown and AsterStudy is launched immediately. Then it crashes and the previously shared messages are displayed in the terminal. Restarting did not work.
Studies where the window to select 'Stable' version of AsterStudy is displayed works perfectly fine.

hberro

cskn

Ok, when Asterstudy is started, PARAVIS is loaded in the background because it is used by the module's post processor.

Try activating manually Paravis before Asterstudy, and report the results please.

cskn

hberro Everything works fine, except the instances where the "Stable" version of AsterStudy is not loaded.

Overwan

Hello

I am looking for as_run in Salome meca 2024 to make an automation in the yacs module

If you have a solution to find this I would like the information please.

k_zurawski

Overwan as_run was replaced by run_aster.

raja

Does the distro support parallel execution of MUMPS or PETSC? (needs to be enabled during compilation)

Does Salome start in hardware rendering mode if an NVIDIA GPU is available? According to your screen prints the MESA driver is set up.

Thanks.

hberro

raja

This installation approach doesn't have limitations related to singularity containers. If you have a recent nvidia GPU card with WSL support, it should be used for hardware acceleration.

My personal setup invoves an older nvidia card that does not support recent drivers that cover WSL, that's why mesa drivers are used.

« Previous Page Next Page »